Challenge us to meet your specific needs.

Q:  There appear to be a number of materials which are similar.  How do I choose between them?

A:  It is helpful if some of the basic performance requirements are known, such as: temperature, media being sealed, location of sealing joint, and any specific requirements or callouts which must be met.  Our staff can help you sort through your requirements and provide additional information which will make the selection process easier.

Back to Top

Q:  What is a "Starburst" core, and when would I use it?

A:  The starburst core refers to the tang formation created when the metal core is pierced.  The result is a column shaped protrusion which is sturdy and strong.  This type of tang is ideally suited to withstand environments which are subject to scrubbing, vibration, or flange movement due to rapid heating cycles or dissimilar metals at the seal point.  This core style makes up our HT (Hi-Tex) and AR (Armor) product lines.  Starburst core is the preferred choice for hot gas (exhaust) and other heavy duty gasket applications.  It provides the radial strength and durability needed for high and extreme heat applications.

Back to Top

Q:  What is a "Corseal" core, and when would I use it?

A:  Corseal is our smaller rectangular tang formation which provides nearly twice the number of bonding points per square inch as our starburst technology.  This configuration allows for a softer crush at bolt up and is ideally suited for narrow wall and tight geometric configurations.  Corseal technology is industry proven for gaskets such as cylinder head, intake, and other lower load applications.

Back to Top

Q:  What is "Surbond", and when would I use it?

A:  Surbond is our solid core technology, which uses a proprietary adhesive system to bond the facing material to the steel.  A solid steel core does not have any holes which could become leak paths, making this style well suited for fluid sealing applications.  Surbond is often used in fuel, oil, and water pump gaskets and will service many other applications which are not exposed to higher temperatures.

Back to Top

Q:  How do I get a sample?

A:  Samples are available to assist you in your selection and prototyping processes by calling our office at 641.648.5165.

Back to Top

Q:  How do I get additional technical information?

A:  Specification sheets and MSDS information are available upon request.  You can simply contact our office at 641.648.5165 with your specific document needs.

Back to Top

Q:  How do I get information regarding the cost of the material?

A:  Our personalized quoting process is fast and easy.  mti strives to provide quotations quickly.  Unique or custom situations may take a little longer, but all inquiries will be handled quickly and professionally.

Back to Top

Q:  What is the lead time from purchase order to ship date?

A:  For most standard sheet and coil orders, mti will ship in 1 to 2 weeks.  Custom materials and widths may take an additional 2 weeks, although we are often able to outperform our estimates and ship in less time.  Short quantity sheet configurations are usually available for a same day or next day shipment.

Back to Top

Q:  What if I need material right away?

A:  mti keeps shelf stock of our most popular materials in sheet form, and these are usually able to ship within 48 hours.  Call for product availability when you have immediate needs.

Back to Top

Q:  What sheet sizes are available?

A:  Depending on the specific product line, our standard offering is 24" wide by 39.4" long or 20" by 39.4".   Custom sizes are available but require minimum purchase volumes.  We would be happy to discuss your specific application and fabrication requirements.

Back to Top

Q:  Can I get material in coil form?

A:  Yes, the majority of our products are available in coil form, and like sheets, they will be either 20" or 24" wide by 500' in length. 

Back to Top

Q:  I have a unique application which may require a custom material.  Can mti help with this?

A:  Yes!!  We welcome the next challenge from the marketplace and function as strategic partners with many of our customers.  mti is continually creating new materials and has a number of products which are not part of our standard line.  Call 641.648.5165 to discuss how we can remedy your sealing challenges and become a part of your solution.

Back to Top

Q:  Can you ship a small package?

A:  Yes, by either UPS (your account) or Fed Ex (our account, cost prepaid and added to your invoice). 

Back to Top

Q:  What truck line do you ship with?

A:  Orders weighing approximately 100 pounds (or more) generally ship by the carrier of your choice.  We also offer the ability to ship using one of our preferred carriers allowing you to take advantage of our negotiated discounts. The charges are then added to your invoice.  Many of our customers find they are able to save a substantial amount of time and money on their freight costs by having mti shop for the best rate.  We would be happy to provide a shipping quotation which would allow you to evaluate the best option.

Back to Top

[Home] [About mti] [mti Products] [FAQ's] [News & Feedback] [Contact Us]